The Influence of Bit Edge Shape Parameters on Bone Drilling Force Based on Finite Element Analysis

Abstract

Bone drilling is a common surgery procedure. The drill bit shape directly affects the drilling force. Excessive drilling force may cause bone damage. In this work, on the premise of analyzing and comparing several finite element method (FEM) simulation results for drill bit of 5 mm in diameter commonly used in medical practice, a combination of drilling speed and feed rates which can minimize the drilling force for drilling parameters is determined. Then, the effects of the drill bit shape parameters including helix angle, point angle and edge radius on the drilling force are simulated by using the obtained drilling parameters, and after validation the FEM analysis results show that their variation trend is the same as the experimental one. Then, the optimum bit structure parameters are obtained through the following research: (1) the prediction model of the relationship between drill edge parameters and drilling force is established based on the result of FEM of the drilling process; (2) A particle swarm optimization algorithm is used to obtain the optimal matching parameters of the bit structure; (3) The priority order of the influence of the parameters of the bit on the drilling force is analyzed. The results show that the order of the influence is: the edge radius is the largest, the point angle is the second, and the helix angle is the smallest. The optimum combination of bit structure is that point angle, helix angle and edge radius are 95°, 35°, and 0.02 mm, respectively.

Keywords

• bone drilling
• bit structure
• drilling force
• particle swarm optimization