METHOD OF THE DRIVE POWER DETERMINATION OF THE MECHANISMS OF THE BRIDGE CRANE MOVEMENT CONSIDERING THE ROLLING FRICTION

Abstract

Purpose. The value of drive resistance to its movement is the main parameter at calculating the drive power of bridge crane. The value of the wheel rolling friction on the rails is one of the important parts of the resistance to movement. It is necessary to determine the dependence of static (dynamic) quantities of resistance to the bridge crane movement on a straight section of the track from the position of the bogie in the span, and explore the influence of the wheel flanges resistance for wear. Methodology. Using the analytical dependences for determining the rolling friction coefficient, that depends on the size of the half-width of the contact between the wheel and rail, the improved method for calculating the required drive power of the crane was proposed. Findings. With the proposed method of power calculation the characteristic curve of the crane wheel loads, the coefficient of rolling friction of the wheels and the crane resistance to movement from the position of the bogie on span were built. In the result of graphs analysis it was found that the engine power, obtained by the proposed method is higher than the recommended by the existing standards. The more precise formula for determining the total coefficient of sliding friction that takes into account the friction of wheel flanges on the rail is given. The characteristic curves of such coefficient of friction and the total resistance to movement of the position of the crane bogie were built. Originality. The scientists proposed an improved method of determining the required engine power of bridge crane, which takes into account the effect of rolling friction of the wheels on the rails and the bogie in the span. The improved formula for determining the coefficient of friction that takes into account the friction wheel flanges of the rail was given. The characteristic curve of this coefficient of friction and the total resistance movement of crane from the position of the crane bogie were built. Practical value. The application of the proposed method of determining the driving power of the crane allows determining its value more precisely, taking into account the impedance of the rolling friction of the wheels on the rails with a flanged on the rails. This approach enables better selection of elements of the mechanism of the bridge crane movement.

Keywords

• bridge crane
• rolling friction
• flange
• power
• drive
• bogie