Model of geothermal water deironing on the basis of a triangulation

Abstract

The main of this research was to recognize the efficiency of geothermal water deironing processes. To this, studies on a laboratory scale were conducted. In the paper the modeling of geothermal water deironing processes using new tool basis on triangulation has been used. Carrying out the analysis of potential possibilities of using geothermal water and taking economic aspects of water deironing processes into account, the authors of this article conducted research into the geothermal water deironing processes by adjusting existing knowledge on the removal of iron from cold groundwater. The conducted research confirmed the possibility of adjusting such processes to the treatment of geothermal water, but their effectiveness differs depending on the temperature and salinity of water, but this relation is not linear. The analyzes indicated that the best deironing effect was obtained for water whose salinity does not exceed 10 g/L and the temperature 30̊C.