Influence of V and Zn in FeCrCuMnTi High-Entropy Alloys on Microstructures and Uniaxial Compaction Behavior Prepared by Mechanical Alloying

Abstract

The densification behavior of FeCrCuMnTi (HEA1), FeCrCuMnTiV (HEA2), and FeCrCuMnTiVZn (HEA3) equiatomic high-entropy alloys (HEAs) was explored using different uniaxial quasi-static controlled compaction (1 mm/min). These HEAs were synthesized by mechanical alloying (MA, speed: 300 rpm, BPR: 10:1, time: 25 h). Various phase formations, structural characteristics (crystallite size, lattice strain, and lattice constant), thermo-dynamic calculations, powder surface morphologies, detailed microstructural evolutions, and chemical compositions were examined using X-ray diffraction, high-resolution scanning electron microscopy, and high-resolution transmission electron microscopy. The XRD results revealed the formation of multiple solid solutions (FCC, BCC, and HCP) due to the variation in entropy, and the presence of high-strength elements (Cr, Ti, and V) in the developed HEA alloys. The synthesized powders were consolidated into bulk green samples with different compaction pressures starting from 25 to 1100 MPa under as-milled and milled under stress recovery conditions (150 °C, 1 h). The incorporation of V in the FeCrCuMnTi HEA resulted in improved densification due to a greater reduction in particle size, and high configurational entropy. Furthermore, the stress-recovered powder samples produced more relative density owing to the elimination of lattice strain. Several linear and non-linear compaction models were applied to predict densification behavior. The non-linear Cooper and Eaton model produced the highest regression coefficients compared to the other models.

Keywords

• high-entropy alloys
• microstructures
• powder particle size
• densification
• compaction models