A Comparison of Proximate Composition and Water Stability of Three Selected Shrimp Feeds Used in Sri Lanka

Abstract

Feed is considered as the major expense in shrimp farming, accounting for about 50 – 60% of the total variable costs. Feed is also a major input affecting water quality and subsequently effluent quality in shrimp culture ponds. Therefore, it is important to evaluate feeds to enhance the economical and environmental sustainability of the industry. Two imported feeds from Thailand (B1) and Taiwan (B2) and one local (B3) feed used in shrimp farms were analysed for moisture, protein, lipid, ash, and energy. Pellet stability tests were conducted in salinity adjusted sea water (20 ppt) in plastic tanks (100 L) with flow (treatment) and with out flow (control). Three feed brands used in this study are available in five different sizes corresponding to stock size. Feed sizes were not significantly different (p > 0.05) among different feeds. There was a significant (p 0.05) than B1 (22.8) and B2 (21.3 kjg-1). Water stability of feeds with flow (treatment) and the control (with out flow) were not significantly different (p > 0.05) among feeds. Mean dry matter, protein and ash retention in crumbles after four hours of immersion varied from 81.2 – 84.3%, 59.8 – 63.8% and 64.5 – 66.2%, respectively. Same parameters in the pellets ranged from 79.1 – 83.1%, 53.7 – 65.0% and 68.4 – 71.5%, respectively. Significant differences in water stability between crumble and pellet feeds were observed in all the feed brands except protein in the imported feeds and ash in the local feed. Dry matter retention of pellets in B3 was significantly lower (p < 0.05) than B2 and protein retention in B3 was significantly lower than B1 (p < 0.1; p = 0.08). Ash retention did not significantly vary among feeds. Among the three shrimp feeds, B1 had the highest water stability followed by B2 and B3 in dry matter and protein retention.