Thermomechanical Optimization and Comparison of a Low Thermal Inertia Mold with Rectangular Heating Channels and a Conventional Mold

Abstract

Molds used to manufacture high-performance composites currently do not meet the demand of manufacturers in terms of production rate due to massive mold designs, using straight-through heating channels, that are not thermally reactive. In this paper, using a thermal finite element model, the thermomechanical responses of an existing massive and conventional mold is observed; then, thermomechanical optimizations are carried out on a circular heating channel mold and on a rectangular heating channel mold. The objective of this paper is two-fold: (i) confirm the need to change design rules for molds considering technological aspects (e.g., pressure drop and fluid nature) and (ii) validate the advantages of an innovative concept of a low thermal inertia mold with rectangular heating channels. Results of this study confirm the need to reduce the mass of structures to increase heating rates and the importance of taking into account technological data (heat transfer fluid, pressure drop) to ensure the optimal convective exchange. After optimization, a decrease greater than 75% in heating time for the circular channel model and up to 88% for the rectangular channel model was observed. Moreover, the antagonistic nature between heating rate and thermal homogeneity of the molding surface and between heating rate and mechanical strength is confirmed.