Heliyon (Jul 2024)
Enhancing GFRP fatigue durability for chassis component applications through glass fiber coupling variation
Abstract
As the landscape of mobility trends continues to evolve, concerted efforts have been made to incorporate Carbon Fiber Reinforced Plastic (CFRP) into automotive components. However, the substantial increase in cost relative to the achieved weight reduction has limited its widespread adoption. Consequently, research endeavors have focused on exploring alternative composite materials, adapting fibers such as glass fibers, natural fibers, and recycled fibers, to reduce the cost of composite components. Of particular interest in the automotive industry is the utilization of Glass Fiber Reinforced Plastic (GFRP) in chassis components like leaf springs. Nevertheless, the development of GFRP leaf springs encounters a significant challenge related to the adhesive strength at the interface between epoxy resin and glass fibers, which is crucial for enhancing fatigue durability. While glass fibers were traditionally paired with unsaturated polyester or vinyl ester matrices, the pursuit of improved durability has led to the adoption of epoxy matrices. Regrettably, this transition has not consistently yielded the expected gains in interfacial adhesion.In light of these challenges, this study systematically compares the interfacial adhesion strength and fatigue endurance performance. For comparison, two coupling agents widely used commercially, amino silane and epoxy silane, were selected. Glass fibers treated with each coupling agent were purchased commercially, and glass fiber-reinforced plastic (GFRP) specimens were fabricated using the HP-RTM (High-Pressure Resin Transfer Molding) method. Static property evaluations and fatigue durability assessments were conducted using the fabricated specimens. The results showed that when epoxy silane was used as the coupling agent, the interlaminar shear strength (ILSS) increased by approximately 7 %. Furthermore, SEM(Scanning Electron Microscopes) analysis confirmed a significant enhancement in interfacial adhesion, providing support for the ILSS evaluation results. Consequently, the fatigue durability performance improved by approximately six-fold. This confirms that the improvement in interfacial adhesion due to the change in coupling agents led to enhanced fatigue durability performance.
