Influence of Rare Earth Sm Addition on Microstructure and Tensile Properties of Al-Si-Cu 319 Alloy

Abstract

In the present investigation, the influence of addition of the rare earth element samarium (Sm) in different concentrations (0, 0.1, 0.3, 0.5, 0.7 and 0.9wt.%) on the microstructure and tensile properties of the Al-Si-Cu 319 alloy have been evaluated. Microstructural constituents such as SDAS of α-Al and characteristics of eutectic silicon particles were observed by optical microscopy. It was concluded from the findings that Sm addition reduces the size of secondary dendrite arm spacings (SDAS) and altered the morphology of the eutectic silicon particles from needle-like to lamellar and smaller segments. The tensile properties of the Al-Si-Cu 319 alloy improved with the concentration of Sm. It was found that the highest tensile properties were obtained at 0.7wt.% addition of Sm, i.e., 55.5% higher than unmodified 319 alloy. With the further addition of the Sm above 0.7wt.%, it does not improve the tensile properties of the alloy. This can be attributed to the precipitation of the brittle and needle like quaternary Sm-rich intermetallic compounds observed through Scanning electron microscopy.

Keywords

• al-si-cu 319 alloy
• samarium
• sdas
• eutectic silicon
• tensile properties