Investigations on the effect of 2-[(furan-3ylmethylene)-amino]-benzenethiol on corrosion in carbon steel

Abstract

A Schiff base namely, 2-[(furan-3ylmethylene)-amino]-benzenethiol (2-FAB) was synthesized and its influence on the inhibition of corrosion in carbon steel immersed in 0.5 M H2SO4 was investigated by weight loss analysis, potentiodynamic polarization studies, electrochemical impedance spectroscopy (EIS), scanning electron microscopy (SEM), atomic force microscopy (AFM) and FT-IR spectroscopy. The weight loss measurements showed that 2-FAB has an excellent inhibiting efficiency of 95.51% at a concentration of 250 ppm. The inhibitor efficiency was found to depend on both the concentration and molecular structure of the inhibitor. Potentiodynamic polarization curves revealed that the studied inhibitors represent a mixed-type, predominantly cathodic control. An equivalent circuit is suggested based on an analysis of EIS data. Surface analysis using scanning electron microscope (SEM) and atomic force microscopy (AFM) show a significant morphological improvement on the mild steel surface with the addition of 2-FAB. The negative value of standard free energy of adsorption in the presence of inhibitor suggests the spontaneous adsorption of inhibitors on the carbon steel surface. The Temkin and Langmuir adsorption isotherms were found to provide a accurate description of the adsorption behavior of the inhibitor. Taken as a whole, this work demonstrates that 2-FAB shows promising results in resisting the deterioration of carbon steel in 0.5 M H2SO4 environment. The inhibitor forms a protective film on the surface of the carbon steel, significantly reducing its corrosion rate.

Keywords

• Schiff base
• Corrosion inhibitor
• Weight loss
• Sulfuric acid
• Temkin's adsorption isotherm and SEM & AFM