Mechanical Engineering Journal (Mar 2016)

Numerical simulations of forest fire propagation and smoke transport as an external hazard assessment methodology development for a nuclear power plant

  • Yasushi OKANO,
  • Hidemasa YAMANO

DOI
https://doi.org/10.1299/mej.15-00592
Journal volume & issue
Vol. 3, no. 3
pp. 15-00592 – 15-00592

Abstract

Read online

A new method has been developed to assess potential challenges by forest fire smoke on a cooling function of a decay heat removal system (DHRS) of a sodium-cooled fast reactor. Combinational numerical simulations of a forest fire propagation and a smoke transport were performed to evaluate a cumulative amount of smoke captured on air filters of the DHRS. The forest fire propagation simulations were performed using FARSITE code to evaluate a temporal increase of a forest fire spread area, a frontal fireline location, reaction intensity, and fireline intensity. Peripheral boundary of the forest fire spread area is shaped like an ellipse on the terrain, and the active forest fire area from which smoke is produced as a forest fire product is increased with forest fire spread. The smoke transport simulations were performed using ALOFT-FT code where a spatial distribution of smoke density, especially of particle matter (PM), is evaluated. The snapshot (i.e. at a certain time step) outputs by FARSITE on the reaction intensity and the fireline intensity were utilized as the input data for ALOFT-FT, while it was conservatively assumed that the smoke generated from the active forest fire area along the periphery boundary rises up from the frontal fireline location nearest to a nuclear power plant (NPP) and that prevailing wind transports all smoke to an NPP in the leeward side. The evaluated time-dependent changes of spatial PM density were utilized to calculate a cumulative amount of PM captured on the air filters of the DHRS. Sensitivity analysis was performed on prevailing wind speed to which both the fireline intensity and the smoke transport behavior are sensitive. The total amount of PM on the air filters was conservatively estimated around several hundred grams per m2 which is well below the utilization limit.

Keywords