Application of X-Shaped CFRP Ropes for Structural Upgrading of Reinforced Concrete Beam–Column Joints under Cyclic Loading–Experimental Study

Emmanouil Golias; Adamantis G. Zapris; Violetta K. Kytinou; Mourhat Osman; Michail Koumtzis; Danai Siapera; Constantin E. Chalioris; Chris G. Karayannis

doi:10.3390/fib9070042

Fibers (Jul 2021)

Application of X-Shaped CFRP Ropes for Structural Upgrading of Reinforced Concrete Beam–Column Joints under Cyclic Loading–Experimental Study

Emmanouil Golias,
Adamantis G. Zapris,
Violetta K. Kytinou,
Mourhat Osman,
Michail Koumtzis,
Danai Siapera,
Constantin E. Chalioris,
Chris G. Karayannis

Affiliations

Emmanouil Golias: Laboratory of Reinforced Concrete and Seismic Design of Structures, Civil Engineering Department, School of Engineering, Democritus University of Thrace, 67100 Xanthi, Greece
Adamantis G. Zapris: Laboratory of Reinforced Concrete and Seismic Design of Structures, Civil Engineering Department, School of Engineering, Democritus University of Thrace, 67100 Xanthi, Greece
Violetta K. Kytinou: Laboratory of Reinforced Concrete and Seismic Design of Structures, Civil Engineering Department, School of Engineering, Democritus University of Thrace, 67100 Xanthi, Greece
Mourhat Osman: Laboratory of Reinforced Concrete and Seismic Design of Structures, Civil Engineering Department, School of Engineering, Democritus University of Thrace, 67100 Xanthi, Greece
Michail Koumtzis: Laboratory of Reinforced Concrete and Seismic Design of Structures, Civil Engineering Department, School of Engineering, Democritus University of Thrace, 67100 Xanthi, Greece
Danai Siapera: Laboratory of Reinforced Concrete and Seismic Design of Structures, Civil Engineering Department, School of Engineering, Democritus University of Thrace, 67100 Xanthi, Greece
Constantin E. Chalioris: Laboratory of Reinforced Concrete and Seismic Design of Structures, Civil Engineering Department, School of Engineering, Democritus University of Thrace, 67100 Xanthi, Greece
Chris G. Karayannis: Laboratory of Reinforced Concrete and Seismic Design of Structures, Civil Engineering Department, School of Engineering, Democritus University of Thrace, 67100 Xanthi, Greece

DOI: https://doi.org/10.3390/fib9070042
Journal volume & issue: Vol. 9, no. 7
p. 42

Abstract

Read online

The effectiveness of externally applied fiber-reinforced polymer (FRP) ropes made of carbon fibers in X-shape formation and in both sides of the joint area of reinforced concrete (RC) beam–column connections is experimentally investigated. Six full-scale exterior RC beam–column joint specimens are tested under reverse cyclic deformation. Three of them have been strengthened using carbon FRP (CFRP) ropes that have been placed diagonally in the joint as additional, near surface-mounted reinforcements against shear. Full hysteretic curves, maximum applied load capacity, damage modes, stiffness and energy dissipation values per each loading step are presented and compared. Test results indicated that joint sub assemblages with X-shaped CFRP ropes exhibited improved hysteretic behavior and ameliorated performance with respect to the reference specimens. The effectiveness and the easy-to-apply character of the presented strengthening technique is also discussed.

Published in Fibers

ISSN: 2079-6439 (Online)
Publisher: MDPI AG
Country of publisher: Switzerland
LCC subjects: Technology: Chemical technology: Chemicals: Manufacture, use, etc.; Technology: Chemical technology: Textile bleaching, dyeing, printing, etc.; Science: Biology (General); Science: Physics
Website: http://www.mdpi.com/journal/fibers/

About the journal

Abstract

Keywords