Giant (Mar 2024)
Rational design of pyrene and thienyltriazine-based conjugated microporous polymers for high-performance energy storage and visible-light photocatalytic hydrogen evolution from water
Abstract
Conjugated microporous polymers (CMPs) have found extensive applications in various fields such as optoelectronics, CO2 capture, and catalysis. However, their potential in electrochemical supercapacitors as energy storage and H2 production systems remains relatively unexplored. This limited exploration can be attributed to certain challenges, including issues related to structural and electrochemical stability, as well as the relatively modest specific capacitance. Additionally, many of the CMPs discovered thus far have exhibited lower energy densities, further contributing to this underexplored aspect of their utility. In this study, we prepared two different CMPs [TPET-TTh and PyT-TTh CMPs] containing thienyltriazine units (TTh) for the redox mechanism and constructed electrodes for supercapacitor applications. The synthesized TPET-TTh and PyT-TTh CMPs displayed exceptionally high specific surface areas of 545 and 528 m² g⁻¹, respectively. Furthermore, their pore sizes were very similar, centered at approximately 0.39 and 0.36 nm, respectively. To evaluate their electrochemical properties, the TTh-CMPs were examined using cyclic voltammetry (CV) and galvanostatic charge/discharge (GCD). The resulting CV curves exhibited rectangular shapes, indicative of the characteristic behavior of electric double-layer capacitors, across a range of potential and scan rates. These TPET-TTh and PyT-TTh CMPs delivered nominal specific capacitances of 74 and 76 F g−1 at 0.5 A g−1, respectively. In addition, they exhibited outstanding capacity retentions of 95.2 and 97.30 % even after 2000 cycles [analyzed at 10 A g−1]. The TTh-CMPs also exhibited excellent light-capture capabilities. The PyT-TTh CMP has faster charge separation and lower charge recombination rates than TPET-TTh CMP. This results in a higher hydrogen evolution rate from the water decomposition reaction. The H2 production rate of PyT-TTh CMP could be as high as 18,533 μmol g−1 h−1, which is approximately 4-fold that of TPET-TTh CMP. This study offers a strategy for the design of TTh-containing CMPs that exhibit exceptional energy storage application and photocatalytic efficiency for H2 evolution.
