Pesticidi i Fitomedicina (Jan 2007)
Headspace Solid Phase Microextraction in Pesticide Residues Analysis:1. Optimisation of Extraction Conditions
Abstract
The method of headspace solid phase microextraction (HS/SPME) was successfully used in a simultaneous multicomponent analysis of hexachlorobenzene (HCB), tefluthrin, heptachlor, aldrin, chlorpyrifos, fenthion and bifenthrin in aqueous medium. Measurementswere performed using a nonpolar polydimethyl siloxane (PDMS) fiber. Detection and quantification were done by gas chromatography/mass spectrometry (GC/MS).Optimal conditions for HS/SPME were determined both by performing extraction at different temperatures and examining extraction time profiles at constant temperature. Optimal extraction temperature for each pesticide studied was determined as follows: 60°C for HCB and for heptachlor, 80°C for aldrin and for chlorpyrifos, fenthion and tefluthrin, and temperature exceeding 80°C for bifenthrin. For the pesticide mixture studied, 60°C was identified as the optimum extraction temperature.Based on the time profiles obtained, it was confirmed that satisfactory extraction sensitivity can be obtained even for extraction times shorter than the time required to reach a sorption equilibrium. This conclusion was confirmed by linear concentration profiles obtained for the following ranges: 0.05-10 ng/ml (HCB), 0.05-25 ng/ml (tefluthrin), 0.05-40 ng/ml (heptachlor), 0.05-40 ng/ml (aldrin), 0.05-25 ng/ml (chlorpyrifos), 0.05-25 ng/ml (fenthion)and 0.05-25 ng/ml (bifenthrin).Relative standard deviation (RSD) values for triplicate measurements did not exceed 15%.
