Inhibition of asphaltene deposition by Al2O3 nanoparticles during CO2 injection

Abstract

Carbon dioxide flooding is of interest due to its high oil-sweep efficiency for enhanced oil recovery and contribution to the reduction of greenhouse gas emissions. However, when CO2 is injected into deep geological strata, asphaltene may precipitate. In this work, the effect of Al2O3 nanoparticles on the deposition of asphaltene was examined by assessing the variations of bond number and interfacial tension at different pressures and a temperature of 60 °C. The asphaltene onset point and intensity were characterized using the bond number, which proved a better indicator of changes in oil droplet shape and interfacial tension with gravity. Synthesized mixtures of toluene and n-heptane that contained two different kinds of asphaltenes were used as M and D oil samples. A 0.06 mass% addition of Al2O3 nanoparticles, which worked best for reduction of interfacial tension, was also applied at various pressures. Addition of nanoparticles to the oils prevented asphaltene precipitation in both synthetic samples by altering the slope of the plot of interfacial tension with pressure by 49.7% for the M sample and 9.0% for the D sample. The Al2O3 nanoparticles were found to be more effective at inhibiting asphaltene precipitation for the M oil sample due to its lower H/C ratio and higher nitrogen content.

Keywords

• CO2 injection
• Enhanced oil recovery
• Asphaltene deposition
• Aluminum oxide nanoparticles
• Interfacial tension
• Bond number