Lithosphere (Sep 2021)
Differences in Pore-forming Efficiency among Organic Macerals and Its Restriction against Reservoir Quality: A Case Study Based on the Marine Shale Reservoir in the Longmaxi Formation, Southern Sichuan Basin, China
Abstract
AbstractOrganic matter pores are of important significance in the shale formation system rich of organic matters. Although a lot of studies have discussed controlling factors of organic matter pores in the past, it still lacks a quantitative analysis on contributions of organic macerals to organic matter pores. In this study, a case study based on the overmature marine facies shale reservoir in the first submember of the Longmaxi Formation of Silurian in the Weiyuan area was carried out. Besides, qualitative and quantitative identifications of organic macerals and their pore development capacity were provided using the scanning electron microscopy (SEM). The results showed that (1) pore-forming efficiency is one controlling factor over pore development of organic matter. Sapropelinite shows the highest pore-forming efficiency (avg. 38.5%) and while the vitrinite, inertinite, and exinite have the lower pore-forming efficiency. (2) The content of sapropelinite is the highest (avg. 82.4%), and the content of sapropelinite is higher in the Long111 and Long113 layers. (3) The content of sapropelinite has a strong positive correlation with the organic surface porosity. (4) Organic surface porosity, organic porosity, and total porosity present basically consistent variations along the vertical direction of single well. Organic surface porosity restricts the organic porosity which is the dominant type in total porosity. Hence, pore-forming efficiency of organic macerals restricts performances of the reservoir.