APL Materials (Jul 2022)

Refractory metal-based ohmic contacts on β-Ga2O3 using TiW

  • Kornelius Tetzner,
  • Robert Schewski,
  • Andreas Popp,
  • Saud Bin Anooz,
  • Ta-Shun Chou,
  • Ina Ostermay,
  • Holm Kirmse,
  • Joachim Würfl

DOI
https://doi.org/10.1063/5.0094661
Journal volume & issue
Vol. 10, no. 7
pp. 071108 – 071108-7

Abstract

Read online

The present work investigates the use of the refractory metal alloy TiW as a possible candidate for the realization of ohmic contacts to the ultrawide bandgap semiconductor β-Ga2O3. Ohmic contact properties were analyzed by transfer length measurements of TiW contacts annealed at temperatures between 400 and 900 °C. Optimum contact properties with a contact resistance down to 1.5 × 10−5 Ω cm2 were achieved after annealing at 700 °C in nitrogen on highly doped β-Ga2O3. However, a significant contact resistance increase was observed at annealing temperatures above 700 °C. Cross-sectional analyses of the contacts using scanning transmission electron microscopy revealed the formation of a TiOx interfacial layer of 3–5 nm between TiW and β-Ga2O3. This interlayer features an amorphous structure and most probably possesses a high amount of vacancies and/or Ga impurities supporting charge carrier injection. Upon annealing at temperatures of 900 °C, the interlayer increases in thickness up to 15 nm, featuring crystalline-like properties, suggesting the formation of rutile TiO2. Although severe morphological changes at higher annealing temperatures were also verified by atomic force microscopy, the root cause for the contact resistance increase is attributed to the structural changes in thickness and crystallinity of the interfacial layer.