Fabrication of Carbon Nanotubes Derived from Waste Tire Pyrolytic Carbon and Their Application in the Dehydrogenation of Methylcyclohexane to Produce Hydrogen

Hongli Ye; Shuangxi Liu; Dongmei Huang; Chaojun Jiang; Rui Yuan; Cui Zhang

doi:10.3390/c9040121

C (Dec 2023)

Fabrication of Carbon Nanotubes Derived from Waste Tire Pyrolytic Carbon and Their Application in the Dehydrogenation of Methylcyclohexane to Produce Hydrogen

Hongli Ye,
Shuangxi Liu,
Dongmei Huang,
Chaojun Jiang,
Rui Yuan,
Cui Zhang

Affiliations

Hongli Ye: Laboratory of Aquatic Product Quality and Safety and Processing, Key Laboratory of Oceanic and Polar Fisheries, Ministry of Agriculture and Rural Affairs, East China Sea Fisheries Research Institute, Chinese Academy of Fishery Sciences, Shanghai 200090, China
Shuangxi Liu: Institute of New Catalytic Materials Science and MOE Key Laboratory of Advanced Energy Materials Chemistry, School of Materials Science and Engineering, National Institute of Advanced Materials, Nankai University, Tianjin 300350, China
Dongmei Huang: Laboratory of Aquatic Product Quality and Safety and Processing, Key Laboratory of Oceanic and Polar Fisheries, Ministry of Agriculture and Rural Affairs, East China Sea Fisheries Research Institute, Chinese Academy of Fishery Sciences, Shanghai 200090, China
Chaojun Jiang: Laboratory of Aquatic Product Quality and Safety and Processing, Key Laboratory of Oceanic and Polar Fisheries, Ministry of Agriculture and Rural Affairs, East China Sea Fisheries Research Institute, Chinese Academy of Fishery Sciences, Shanghai 200090, China
Rui Yuan: Laboratory of Aquatic Product Quality and Safety and Processing, Key Laboratory of Oceanic and Polar Fisheries, Ministry of Agriculture and Rural Affairs, East China Sea Fisheries Research Institute, Chinese Academy of Fishery Sciences, Shanghai 200090, China
Cui Zhang: Institute of New Catalytic Materials Science and MOE Key Laboratory of Advanced Energy Materials Chemistry, School of Materials Science and Engineering, National Institute of Advanced Materials, Nankai University, Tianjin 300350, China

DOI: https://doi.org/10.3390/c9040121
Journal volume & issue: Vol. 9, no. 4
p. 121

Abstract

Read online

The accumulation of waste tires has resulted in very urgent environmental problems. Pyrolysis has been regarded as a green eco-friendly technology to deal with waste tires, and it is vital to make use of the pyrolysis carbon. Herein, we propose a new way to utilize pyrolysis carbon, to prepare carbon nanotubes with the help of ferrocene. The optimal preparation processes were determined by optimizing the parameters including the solvent, temperature, time, etc. The results of scanning electron microscopy and transmission electron microscopy evidenced the successful formation of carbon nanotubes. Meanwhile, the Brunauer–Emmett–Teller (BET) method and N2-adsorption showed that the yielded carbon nanotubes featured a large surface area and abundant pore structure in comparison with the pyrolytic carbon. Finally, the as-prepared carbon nanotubes were applied as the supports for Pt-based catalysts for the dehydrogenation of methylcyclohexane to produce hydrogen. The results showed that the Pt/carbon-nanotubes catalyst exhibited the highest conversion of methylcyclohexane (28.6%), stability, and hydrogen evolution rate (336.9 mmol/gPt/min) compared to the resulting Pt/commercial-activated-carbon (13.6% and 160.2 mmol/gPt/min) and Pt/pyrolytic-carbon catalysts (0.19% and 2.23 mmol/gPt/min).

Published in C

ISSN: 2311-5629 (Online)
Publisher: MDPI AG
Country of publisher: Switzerland
LCC subjects: Science: Chemistry: Organic chemistry
Website: http://www.mdpi.com/journal/carbon

About the journal

Abstract

Keywords