Preparation and Performance of Resin-based Fe Nanoparticles/Carbon Fibers Microwave Absorbing Composite Plates

ZHOU Yuan-liang; SHAH Syed; ZHANG Li; MUHMMAD Javid; DUAN Yu-ping; DONG Xing-long

doi:10.11868/j.issn.1001-4381.2016.000848

Cailiao gongcheng (Mar 2018)

Preparation and Performance of Resin-based Fe Nanoparticles/Carbon Fibers Microwave Absorbing Composite Plates

ZHOU Yuan-liang,
SHAH Syed,
ZHANG Li,
MUHMMAD Javid,
DUAN Yu-ping,
DONG Xing-long

Affiliations

ZHOU Yuan-liang: Key Laboratory of Materials Modification by Laser, Ion and Electron Beams(Ministry of Education), School of Materials Science and Engineering, Dalian University of Technology, Dalian 116024, Liaoning, China
SHAH Syed: Key Laboratory of Materials Modification by Laser, Ion and Electron Beams(Ministry of Education), School of Materials Science and Engineering, Dalian University of Technology, Dalian 116024, Liaoning, China
ZHANG Li: Key Laboratory of Materials Modification by Laser, Ion and Electron Beams(Ministry of Education), School of Materials Science and Engineering, Dalian University of Technology, Dalian 116024, Liaoning, China
MUHMMAD Javid: Key Laboratory of Materials Modification by Laser, Ion and Electron Beams(Ministry of Education), School of Materials Science and Engineering, Dalian University of Technology, Dalian 116024, Liaoning, China
DUAN Yu-ping: Key Laboratory of Materials Modification by Laser, Ion and Electron Beams(Ministry of Education), School of Materials Science and Engineering, Dalian University of Technology, Dalian 116024, Liaoning, China
DONG Xing-long: Key Laboratory of Materials Modification by Laser, Ion and Electron Beams(Ministry of Education), School of Materials Science and Engineering, Dalian University of Technology, Dalian 116024, Liaoning, China

DOI: https://doi.org/10.11868/j.issn.1001-4381.2016.000848
Journal volume & issue: Vol. 46, no. 3
pp. 41 – 47

Abstract

Read online

A series of Fe NPs/CFs/ER nanocomposite plates were prepared by using Fe nanoparticles as microwave absorbent, the surface modification of as-prepared Fe nanoparticles was carried out by using silane coupling agents (KH-550), carbon fibers were used to enhance the reflection of electromagnetic waves inside and mechanical properties. The results show that microwave absorption of nanocomposite plates increases with increasing of mass percentage of Fe nanoparticles and carbon fibers,their gradient concentration results in resonance phenomena in specific frequency region.The microwave absorption property is anisotropic, the properties of at the vertical direction of carbon fibers towards incident wave are better than the parallel case, the minimum reflectivity peak value of the nanocomposites with 30%(mass fraction, the same as below) of Fe NPs and 5.52% of CFs reaches -26.8dB at 4.9GHz with the matching thickness of 4.56mm.CFs can maintain the bending properties of nanocomposites effectively, the bending strength of the nanocomposite with 30% Fe NPs is just lower than that with 0% Fe NPs by 5.81%.

Published in Cailiao gongcheng

ISSN: 1001-4381 (Print)
Publisher: Journal of Materials Engineering
Country of publisher: China
LCC subjects: Technology: Electrical engineering. Electronics. Nuclear engineering: Materials of engineering and construction. Mechanics of materials
Website: http://jme.biam.ac.cn/CN/1001-4381/home.shtml

About the journal

Abstract

Keywords