FirePhysChem (Sep 2024)
Combustion of iron particles in solid propellants at elevated pressure
Abstract
Metal fuels, such as aluminum (Al) and iron (Fe), can be added to composite solid propellants to improve their performance, such as specific impulse, density, and burning rate. In comparison to aluminum, iron can theoretically provide improved density specific impulse and higher flame temperatures; reduce condensed combustion product (CCP) concentration and the associated two-phase flow losses; and eliminate hydrochloric acid (HCl) in the exhaust products. A fundamental and quantitative understanding of metal particle aggregation and agglomeration processes in solid propellants is required to understand the underlying combustion mechanisms in these systems. In the current study, composite strand and laminate AP/HTPB/AP propellant samples loaded with Fe microparticles (∼45 μm in diameter) were burned at elevated pressures in an optically accessible strand bomb. Combustion processes were monitored with transient pressure diagnostics and a high-speed camera fitted with a high-magnification lens system (3.83 μm/pixel resolution) for the laminate propellant experiments. An automated image processing algorithm was developed to measure burning rates and ejected particle/agglomerate sizes and velocities. Time-resolved statistical distributions of both particle size and velocity are presented at elevated pressure for multiple laminate propellant experiments with a high degree of repeatability and low measurement error estimated as < ±5% and < ±1.5% for particle size and velocity, respectively. The incorporation of iron microparticles into the composite strand propellants yielded over a 20% increase in the global burning rate over the range of pressures evaluated (3.45–13.8 MPa). Similarly, the addition of iron to the fuel lamina in laminate propellant samples led to an approximately 30% increase in the global burning rate at the evaluated pressure (3.45 MPa). Additive particles were observed to eject near the oxidizer/fuel interface, or to melt, aggregate, coalesce, and agglomerate on the fuel lamina surface prior to ejection. Particle velocities are controlled by a balance of gravitational forces, drag forces imparted by expanding combustion product gases, and particle inertia. The observed combustion enhancements are attributed to the combined effects of catalytic mechanisms, increased radiation heat transfer, and local energy release from reacting iron particles. In addition, discussions on the image processing methods developed in the current study, corresponding potential sources of error, and prospective areas of improvement are provided. The experimental approach developed enables high-speed and high-magnification visualization of propellant combustion at high pressures and can be utilized to better understand the fundamental combustion behavior of energetic systems.
