Improving Consistency of GNSS-IR Reflector Height Estimates between Different Frequencies Using Multichannel Singular Spectrum Analysis

Abstract

Previous studies of GNSS-IR mainly focused on the legacy L1C signal; the potential of modernized signals (L2C and L5Q) has not yet been fully exploited. In this paper, we applied the Multichannel Singular Spectrum Analysis (M-SSA) method to extract common interference patterns from different frequencies simultaneously. The three-frequency (L1C, L2C, and L5Q) signal-to-noise ratio (SNR) measurements from a total of 840 satellite rising and setting arcs, occurring between day of year 250 to 279 in year 2020 and 2021, were used. By comparing GNSS-IR reflector heights obtained from the original and M-SSA-reconstructed SNR time series, we found that M-SSA significantly improves the between-frequency consistency, as shown by an increase in the values of R-squared of linear regression from (0.69, 0.67, 0.89) to (0.95, 0.96, 0.98), and a decrease in RMSE from (0.10 m, 0.10 m, 0.06 m) to (0.04 m, 0.04 m, 0.02 m) for S1C-S2C, S1C-S5Q, and S2C-S5Q pair, respectively. Our results validate (1) the effectiveness of the M-SSA method in extracting common interference patterns from multi-frequency SNR time series, and (2) the superiority of modernized civil signals L2C and L5Q over the legacy L1C signal in GNSS-IR studies. We also emphasize the important role that the L5 signal will play in future GNSS-IR research because of its compatibility and interoperability among different satellite navigation systems.

Keywords

• GNSS-IR
• M-SSA
• data-adaptive
• multi-frequency