Microstructural study of additively-manufactured carbon steel-stainless steel 316L - Inconel 625 functionally graded material: Simulation and experimental approaches

Abstract

This study aims to analyze the microstructure and present phases of functionally graded carbon steel - stainless steel 316L - Inconel 625 using experimental methods and computational software (JMatPro). Both FE-SEM and SEM-EDS equipment were employed to evaluate the materials. The JMatPro software accurately simulated the present phases and their formation temperatures. The microstructure in the plain carbon steel part formed the ferrite phase at 900 °C, while a small amount of pearlite structure formed at 700 °C, remaining stable at ambient temperature. Chromium phase in stainless steel 316 L layers increased with solidification, with a higher increase in the delta ferrite phase. Inconel 625 at 1130 °C, the Laves nucleated with austenite, stable up to ambient temperature. As liquid decreased, niobium and molybdenum accumulation increased, potentially leading to Laves formation. The significant increase in niobium content at the interface of stainless steel 316L-Inconel 625 is attributed to an increase in iron content. The research indicated a good correlation between the observed and predicted microstructures.

Keywords

• Functionally graded materials
• JMatPro software
• Stainless steel 316L
• Inconel 625
• Microstructure