Evaluation on Properties of Cement Mortar and Brick Using Magnetically Separated Coal Power Plant Bottom Ash

Abstract

Abstract Recycling of abandoned waste bottom ash has been a key issue in Republic of Korea in terms of environmental protection as well as economic concern. In this work, a method for recycling of abandoned bottom ash has been discussed based on the results from laboratory and industrial-scale experiments. Abandoned bottom ash was magnetically separated and properties of magnetically separated bottom ash samples as well as properties of mortar and masonry cement brick made of bottom ash were investigated. According to the experimental results, bulk and skeletal densities were ranked in the order of strongly magnetic > weakly magnetic > as-received > non-magnetic (from heavier to lighter) bottom ash. From laboratory-scale experiments, compressive strengths of mortars made of bottom ash samples (measured by ASTM C 109) were lower than that of mortar made of standard sand. Among bottom ash samples, mortar made of non-magnetic bottom ash (after removal of unburnt carbon) showed higher compressive strength with lower thermal conductivity (measured by ASTM C 1113) and weight than others. Masonry cement brick made of magnetic bottom ash showed lower weight and thermal conductivity than those made of standard sand, while meeting the KS strength guideline as a masonry cement brick. The results suggest the applicability of bottom ash as lightweight aggregate for production of masonry cement brick. However, considering the lower strength obtained from masonry cement brick made of as-received bottom ash (without removal of unburnt carbon), unburnt carbon content should be removed prior to its utilization as lightweight aggregate.

Keywords

• Bottom ash
• Recycle
• Magnetic separation
• Lightweight aggregate
• Masonry cement brick