Assessment of Static Positioning Accuracy Using Low-Cost Smartphone GPS Devices for Geodetic Survey Points’ Determination and Monitoring

Abstract

Recent developments enable to access raw Global Navigation Satellite System (GNSS) measurements of mobile phones. Initially, researchers using signals gathered by mobile phones for high accuracy surveying were not successful in ambiguity fixing. Nowadays, GNSS chips, which are built in the latest smartphones, deliver code and primarily carrier phase observations available for detailed analysis in post-processing applications. Therefore, we decided to check the performance of carrier phase ambiguity fixing and positioning accuracy results of the latest Huawei P30 pro smartphone equipped with a dual-frequency GNSS receiver. We collected 3 h of raw static data in separate sessions at a known point location. For two sessions, the mobile phone was mounted vertically and for the third one—horizontally. At the same time, a high-class geodetic receiver was used for L1 and L5 signal comparison purposes. The carrier phase measurements were processed using commercial post-processing software with reference to the closest base station observations located 4 km away. Additionally, 1 h sessions were divided into 10, 15, 20 and 30 min separate sub-sessions to check the accuracy of the surveying results in fast static mode. According to the post-processing results, we were able to fix all L1 ambiguities based on Global Positioning System (GPS)-only satellite constellation. In comparison to the fixed reference point position, all three 1 h static session results were at centimeters level of accuracy (1–4 cm). For fast static surveying mode, the best results were obtained for 20 and 30 min sessions, where average accuracy was also at centimeters level.

Keywords

• smartphone
• low-cost receivers
• GNSS static positioning
• GPS surveying