3D Printing of Anisotropic Piezoresistive Pressure Sensors for Directional Force Perception

Abstract

Abstract Anisotropic pressure sensors are gaining increasing attention for next‐generation wearable electronics and intelligent infrastructure owing to their sensitivity in identifying different directional forces. 3D printing technologies have unparalleled advantages in the design of anisotropic pressure sensors with customized 3D structures for realizing tunable anisotropy. 3D printing has demonstrated few successes in utilizing piezoelectric nanocomposites for anisotropic recognition. However, 3D‐printed anisotropic piezoresistive pressure sensors (PPSs) remain unexplored despite their convenience in saving the poling process. This study pioneers the development of an aqueous printable ink containing waterborne polyurethane elastomer. An anisotropic PPS featuring tailorable flexibility in macroscopic 3D structures and microscopic pore morphologies is created by adopting direct ink writing 3D printing technology. Consequently, the desired directional force perception is achieved by programming the printing schemes. Notably, the printed PPS demonstrated excellent deformability, with a relative sensitivity of 1.22 (kPa*wt. %)−1 over a substantial pressure range (2.8 to 8.1 kPa), approximately fivefold than that of a state‐of‐the‐art carbon‐based PPS. This study underscores the versatility of 3D printing in customizing highly sensitive anisotropic pressure sensors for advanced sensing applications that are difficult to achieve using conventional measures.

Keywords

• 3D printing
• anisotropic pressure sensor
• directional response
• elastomeric conductive composite
• tunable anisotropy