Modeling and Validation of the Sealing Performance of High-Pressure Vane Rotary Actuator

Abstract

The EHRA (Electro-Hydraulic Rotary Actuator), using a vane rotary actuator, has the advantages of a high torque density and integration and is expected to become a joint actuator for robots. This research focuses on the sealing characteristics of various parts of a vane rotary actuator. The average Reynolds equation was used to analyze the leakage characteristics at the gap. A detailed theoretical analysis was conducted on the internal leakage mechanism of a vane rotary actuator using an X-ring as the dynamic seal for the rotor vane. According to the path of internal leakage, different sealing forms are considered as a series or parallel, and the Newton iteration method is used to obtain the total internal leakage characteristics of a vane rotary actuator. It was also considered that the deformation of the vane rotary actuator caused a thicker gap, leading to an increase in internal leakage. The calculation results are consistent with the experimental data. The analysis results indicate that when estimating the internal leakage of a vane rotary actuator, it is necessary to take the pressure of the high-pressure chamber and output shaft position as inputs. This research provides a reference for an analysis of the method of internal leakage for vane rotary actuators. It provides theoretical support for designing a vane rotary actuator with more minor internal leakage and a higher volumetric efficiency.

Keywords

• vane rotary actuator
• X-ring
• average Reynolds equation
• elastohydrodynamic lubrication
• reciprocating seal