Reduction of interface defects in gate-recessed GaN HEMTs by neutral beam etching

Abstract

This study investigates and compares the impact of different etching techniques on the fabrication of GaN high electron mobility transistors (HEMTs) between the inductively coupled plasma reactive ion etching (ICP-RIE) and the neutral beam etching (NBE) for the gate recess. By conducting direct current analysis, it was found that devices manufactured using the NBE exhibited superior electrical performance as compared with those produced using the ICP-RIE. These enhanced electrical characteristics include a transconductance of up to 100.4 mS/mm, a threshold voltage (Vth) of −2.3 V, an on/off current ratio of 1.1 × 109, a subthreshold swing (S.S.) of 99.63 mV/dec, and a remarkably low gate leakage current. Additionally, we noted varying degrees of hysteresis in the I–V characteristics were related to process disparities possibly leading to interface defects. Multi-frequency capacitance-voltage (C–V) measurements were used to identify the interface defects at the oxide/AlGaN interface of the gate. The results revealed that devices fabricated using the NBE exhibited a lower interface defect density as compared with those fabricated using the ICP-RIE, thereby elucidating the reduced hysteresis observed in the I–V characteristics. These findings indicated the significant advantages of the NBE process in the fabrication of GaN HEMTs.

Keywords

• GaN HEMTs
• Gate recess
• Neutral beam etching
• Multi-frequency C–V
• Interface defects