Amplitude-frequency response of a helically-wound fiber distributed acoustic sensor (DAS)

Abstract

The goals of this study were to analyze the capabilities of DAS (distributed sensors) in resolving mining problems, compare them with existing seismoacoustic data collection systems, and prepare the basis for conducting seismoacoustic studies with recording by a fiber optic distributed system. This paper considers the capabilities of recording seismoacoustic responses using fiber optic distributed acoustic systems (DAS). Based on physical and geometrical analysis, the amplitude-frequency responses (characteristics) of recorded longitudinal waves for straight and helically-wound fibers were obtained. In the case of helically-wound fiber, the frequency response depends on several key factors: integrating the measured value along the fiber based on the measurement; the angle of incidence on the cable; and the winding angle of the fiber in the cable. An increase in the winding angle increases the uniformity of the amplitude-frequency characteristics of longitudinal waves both in terms of frequencies and angles of incidence. At the same time, helical winding changes the effective response spacing (gauge length). This makes it possible, by summing the responses of the straight and helically-wound fibers due to the overlap of the spectra, to record frequencies that are suppressed in case of separate recording. Based on the study results, a cable design was proposed to record broadband seismoacoustic responses enabling a wide range of mining and engineering problems to be resolved, and for seismic surveys both in wells and on the surface to be carried out.

Keywords

• distributed acoustic sensor
• fiber optic sensor
• seismic exploration
• borehole seismoacoustics
• rayleigh scattering
• receiver directivity pattern