Effect of powder and process parameters on in-situ alloying of nitinol during laser powder bed fusion

Abstract

Powder characteristics such as flow energy, bulk density, compressibility, morphology, particle size distribution (PSD) and laser energy absorbtivity have a significant impact on the Laser Bed Powder Fusion (L-PBF) process. The impact of powder characteristics on in-situ nickel-titanium alloy formation within the L-PBF process is not well understood. In this work, the characteristics of nickel, titanium and two elemental blends of nickel-titanium powder were compared with those of a pre-alloyed nitinol powder. L-PBF solidification tracks were generated using selected powders and characterised for resulting track dimensions and chemical homogeneity. This study demonstrates that the melt homogenisation time and the size of titanium particles relative to nickel particles are critical factors for successful in-situ alloying of nitinol within the L-PBF process. The variation in elemental composition within solidification track cross sections, as measured by EDX point spectra, was found to increase significantly for laser scanning speeds of 400 mm/s and above. Furthermore, the elemental composition inhomogeneity with increasing laser scan speed was found to be significantly more pronounced for a nickel-titanium powder blend of spherical particles with average titanium particle size of 48 μm compared to an otherwise similar blend with an average titanium particle size of 32 μm. There was no significant difference recorded between solidification track widths of in-situ alloyed blends compared to pre-alloyed blends, indicating that optimal hatch spacing for in-situ alloying is likely to be similar to that required for pre-alloyed powders.