Heliyon (Jan 2024)
Study on extraction and characterization of anchote (Coccinia abyssinica) starch and reinforced enset (Ensete ventricosum) fiber for the production of reinforced bioplastic film
Abstract
Population expansion is causing an increase in dependence on plastic materials. The worst aspects of conventional plastics were their inability to biodegrade, their poor capacity to transmit water vapor, and their production of greenhouse gases. Usages of bioplastics are necessary for the advancement of a green economy and environment in order to eradicate these drawbacks of traditional plastics. In this study, reinforced bioplastic film was produced from anchote (Coccinia Abyssinica) starch and enset (Ensete Ventricosum) fiber. Starch from anchote was extracted and its properties were characterized via adequate techniques. The maximum carbohydrate content (86.26 ± 0.25%w/w) of anchote starch indicates that it is suitable feedstock for plastic film production. In addition, extracted starch was characterized by SEM, FTIR, TGA and XRD. The reinforcing material enset fiber was extracted and characterized by FTIR and XRD. The results of both feedstock materials exhibited the good characteristics and viability for bioplastic film production. Enset fiber loadings used were 0 %, 4 %, 8 %, 12 % and 16 % w/w in starch basis. Tensile strength, elongation, thickness, moisture content, transparency, solubility and density of produced bioplastic were determined. Tensile force grew and elongation reduced as fiber loading rose up to 8 %. The tensile strength gradually declined with increasing fiber loading. Additionally, the created bioplastic film's groups of functions and chemical bonds were examined. In comparison to unreinforced plastic film, the results showed that the reinforced bioplastic film used in this study was an excellent and effective product.
