Modeling Adhesive Hysteresis

Abstract

When an elastomer approaches or retracts from an adhesive indenter, the elastomer’s surface can suddenly become unstable and reshape itself quasi-discontinuously, e.g., when small-scale asperities jump into or snap out of contact. Such dynamics lead to a hysteresis between approach and retraction. In this study, we quantify numerically and analytically the ensuing unavoidable energy loss for rigid indenters with flat, Hertzian and randomly rough profiles. The range of adhesion turns out to be central, in particular during the rarely modeled approach to contact. For example, negligible traction on approach but quite noticeable adhesion for nominal plane contacts hinges on the use of short-range adhesion. Central attention is paid to the design of cohesive-zone models for the efficient simulation of dynamical processes. Our study includes a Griffith’s type analysis for the energy lost during fracture and regeneration of a flat interface. It reveals that the leading-order corrections of the energy loss are due to the finite-range adhesion scale at best, with the third root of the linear mesh size, while leading-order errors in the pull-off force disappear linearly.

Keywords

• adhesion
• cohesive zone model
• hysteresis