Extension of lifespan of graphite in fuel blocks of high-temperature gas-cooled reactors as the resource for ensuring design values of nuclear fuel burn-up

Abstract

High-temperature gas-cooled reactor (HTGR) is one of promising candidates for new generation of nuclear power reactors. This type of nuclear reactor is characterized with the following principal features: highly efficient generation of electricity (thermal efficiency of about 50%); the use of high-temperature heat in different production processes; reactor core self-protection properties; practical exclusion of reactor core meltdown in case of accidents; the possibility of implementation of various nuclear fuel cycle options; reduced radiation and thermal effects on the environment, forecasted acceptability of financial performance with respect to cost of electricity as compared with alternative energy sources. The range of output coolant temperatures in high-temperature reactors within the limits of 750–950 °C predetermines the use of graphite as the structural material of the reactor core and helium as the inert coolant. Application of graphite ensures higher heat capacity of the reactor core and its practical non-meltability. Residence time of reactor graphite depends on the critical value of fluence of damaging neutrons (neutrons with energies above 180 keV). In its turn, the value of critical neutron fluence is determined by the irradiation temperature and flux density of accompanying gamma-radiation. The values of critical fluence for graphite decrease within high-temperature region of 800–1000 °C to 1·1022 – 2·1021 cm–2, respectively. The compactness of the core results in the increase of the fracture of damaging neutrons in the total flux. These circumstances predetermine relatively low values of lifespan of graphite structures in high-temperature reactors. Design features and operational parameters of GT-MHR high-temperature gas-cooled reactor are described in the present paper. Results of neutronics calculations allowing determining the values of damaging neutron flux, nuclear fuel burnup and expired lifespan of graphite of fuel blocks were obtained. The mismatch between positions of the maxima in the dependences of fuel burnup and exhausted lifespan of graphite in fuel blocks along the core height is demonstrated. The map and methodology for re-shuffling fuel blocks of the GT-MHR reactor core were developed as the result of analysis of the calculated data for ensuring the matching between the design value of the fuel burnup and expected total graphite lifespan.

Keywords

• Critical fluence
• reactor-grade