Advances in Mechanical Engineering (Oct 2016)

Baseline correction of vibration acceleration signals with inconsistent initial velocity and displacement

  • Chao Pan,
  • Ruifu Zhang,
  • Hao Luo,
  • Hua Shen

DOI
https://doi.org/10.1177/1687814016675534
Journal volume & issue
Vol. 8

Abstract

Read online

This study improves upon the traditional polynomial detrending method in order to correct the vibration acceleration signals with inconsistent initial velocity and displacement more rationally and efficiently. When numerical integration of recorded acceleration signals using assumed initial velocity and displacement values (which are generally inconsistent with real values) is performed, baseline shift or drift phenomenon can arise in velocity and displacement curves obtained. Baseline correction must be performed if an inconsistent acceleration signal is to be used in dynamic analyses. Polynomial detrending is generally used to remove unreasonable trends in time series, but the consistency among acceleration, velocity, and displacement has not received sufficient attention. The traditional polynomial detrending method is improved by purposefully removing the shifted trends in velocity and displacement. Two inconsistent vibration signals are selected to be corrected using both the traditional method and the improved method. It was found that the traditional method does not give a satisfactory correction result, but the improved method can correct the signal to be consistent. The improved detrending method is effective in making vibration signals have consistent acceleration, velocity, and displacement.