Journal of Asian Architecture and Building Engineering (May 2024)
Stress-strain behavior of columns confined with bamboo reinforced concrete jacket
Abstract
The need for retrofitting of building structures is generally caused by two cases: to repair damaged structures or to improve the structural performance of weak structures. The concrete jacket method is widely chosen to solve the problem due to the more economical and simple procedure compared to other methods. In this study, retrofitting using bamboo-reinforced concrete jacket (BRCJ) was applied on reinforced concrete columns. Bamboo was used to replace steel as the longitudinal and transverse reinforcements of the concrete jacket with the aim of finding an alternative for an environmentally friendly green material and a lower-cost manufacturing process compared to steel. The performance of the jacket was studied by investigating the confinement effectiveness that is influenced by initial column conditions, spacing of bamboo stirrups, and the slenderness of longitudinal reinforcement. The outcomes showed that the bamboo-reinforced concrete jackets were able to strengthen the columns up to 170% and 140% of the initial strength of the undamaged and damaged columns, respectively. The BRCJ is more effective on columns that are still at the pre-peak-strength stage. The confinement effectiveness is also largely affected by the bamboo stirrups spacing. By reducing the spacing of bamboo stirrups to about half that of steel stirrups, the ductility ratio of retrofitted columns increased up to 90% higher than the original columns. Further, the confinement effect of BRCJ can also be increased by increasing the slenderness ratio of bamboo longitudinal reinforcement. Finally, the stress–strain relationship for concrete columns retrofitted with bamboo-reinforced concrete jackets has been proposed which shows great agreement with the experimental data. Overall, BRCJ has shown promising results to be used to strengthen damaged or weak structures.
Keywords