Fermentation (Feb 2024)

Application of Aqueous Two-Phase Systems with Thermoseparating Polymers (EOPO) as a Method for Extractive Fermentation with <i>Neochloris oleoabundans</i>

  • Ana Patricia Garza-Chapa,
  • Carlos Iván Ávila-Velasco,
  • José González-Valdez,
  • Alma Gómez-Loredo

DOI
https://doi.org/10.3390/fermentation10030130
Journal volume & issue
Vol. 10, no. 3
p. 130

Abstract

Read online

Extractive fermentation is an in situ method for the production and recovery of biomolecules of interest. Aqueous two-phase systems (ATPS) allow the product to be recovered in one phase of the system, reducing unit operations in the bioprocess. Thermosensitive polymers such as EOPOs are an interesting alternative to be applied in ATPS. In this work, different EOPOs were tested in an extractive fermentation strategy with the green microalgae Neochloris oleoabundans to provide a basis for future implementations of these systems in microalgae bioprocesses. Extractive fermentations were carried out with two EOPOs of different molecular weights (3900 and 12,000 g/mol) at concentrations of 10% and 15% (w/v). The microalga was incubated axenically under two different sets of conditions for 21 and 45 days, respectively. Cell counts were performed, and cell growth curves were obtained. Additionally, a semi-continuous and batch extractive fermentation assay was performed. The extractive fermentation with EOPO showed lower cell growth and a longer adaptation time of the microalgae in the fermentation, and EPS production yields of up to 8–23 g/L were obtained. Extractive fermentation is an interesting method to be implemented in microalgae cultures; however, further conditions need to be explored to achieve an appropriate bioprocess.

Keywords