Petroleum Exploration and Development (Oct 2020)

Geological characteristics and high production control factors of shale gas reservoirs in Silurian Longmaxi Formation, southern Sichuan Basin, SW China

  • Xinhua MA,
  • Jun XIE,
  • Rui YONG,
  • Yiqing ZHU

Journal volume & issue
Vol. 47, no. 5
pp. 901 – 915

Abstract

Read online

Marine shale gas resources have great potential in the south of the Sichuan Basin in China. At present, the high-quality shale gas resources at depth of 2000–3500 m are under effective development, and strategic breakthroughs have been made in deeper shale gas resources at depth of 3500–4500 m. To promote the effective production of shale gas in this area, this study examines key factors controlling high shale gas production and presents the next exploration direction in the southern Sichuan Basin based on summarizing the geological understandings from the Lower Silurian Longmaxi Formation shale gas exploration combined with the latest results of geological evaluation. The results show that: (1) The relative sea depth in marine shelf sedimentary environment controls the development and distribution of reservoirs. In the relatively deep water area in deep-water shelf, grade-I reservoirs with a larger continuous thickness develop. The relative depth of sea in marine shelf sedimentary environment can be determined by redox conditions. The research shows that the uranium to thorium mass ratio greater than 1.25 indicates relatively deep water in anoxic reduction environment, and the uranium to thorium mass ratio of 0.75–1.25 indicates semi-deep water in weak reduction and weak oxidation environment, and the uranium to thorium mass ratio less than 0.75 indicates relatively shallow water in strong oxidation environment. (2) The propped fractures in shale reservoirs subject to fracturing treatment are generally 10–12 m high, if grade-I reservoirs are more than 10 m in continuous thickness, then all the propped section would be high-quality reserves; in this case, the longer the continuous thickness of penetrated grade-I reservoirs, the higher the production will be. (3) The shale gas reservoirs at 3500–4500 m depth in southern Sichuan are characterized by high formation pressure, high pressure coefficient, well preserved pores, good pore structure and high proportion of free gas, making them the most favorable new field for shale gas exploration; and the pressure coefficient greater than 1.2 is a necessary condition for shale gas wells to obtain high production. (4) High production wells in the deep shale gas reservoirs are those in areas where Long11– Long13 sub-beds are more than 10 m thick, with 1500 m long horizontal section, grade-I reservoirs penetration rate of over 90%, and fractured by dense cutting + high intensity sand injection + large displacement + large liquid volume. (5) The relatively deep-water area in the deep-water shelf and the area at depth of 3500–4500 m well overlap in the southern Sichuan, and the overlapping area is the most favorable shale gas exploration and development zones in the southern Sichuan in the future. With advancement in theory and technology, annual shale gas production in the southern Sichuan is expected to reach 450×108 m3.

Keywords