IEEE Journal of the Electron Devices Society (Jan 2022)
Low-Resistive Source/Drain Formation Using Nitrogen Plasma Treatment in Self-Aligned In-Ga-Zn-Sn-O Thin-Film Transistors
Abstract
In this work, we demonstrate the effectiveness of nitrogen plasma treatment on the formation of low-resistive source/drain (S/D) in self-aligned (SA) oxide thin-film transistors (TFTs) using a high-mobility oxide semiconductor (OS), In-Ga-Zn-Sn-O (IGZTO). The nitrogen plasma treatment was more effective at reducing the sheet resistance ( ${R} _{\mathrm{ sheet}}$ ) of IGZTO films than the commonly used argon plasma treatment. Furthermore, ${R} _{\mathrm{ sheet}}$ for nitrogen-plasma-treated IGZTO films remained low, even when the RF power and radiation time during the plasma treatment were increased when the minimum ${R} _{\mathrm{ sheet}}$ was achieved. The same trends were also observed in OS films with different compositions, such as In-Ga-Zn-O and In-Sn-Zn-O. These results indicate that nitrogen plasma treatment is effective for achieving a reduction of ${R} _{\mathrm{ sheet}}$ for various OS films with a wide process window regarding plasma processing parameters. The advantages could be attributed to the smaller sputtering effect on the OS films due to the lower mass of nitrogen ions than argon ions, which was verified by X-ray reflectivity and X-ray photoelectron spectroscopy analyses. For further validation, SA IGZTO TFTs with a channel length ( ${L}$ ) of 3 to 100 $\mu \text{m}$ were fabricated with nitrogen or argon plasma treatment. The width-normalized parasitic SD resistance ( $R_{\mathrm{ SD}} {W}$ ) with the nitrogen plasma treatment was determined to be 11.3 $\Omega \cdot $ cm, which was ca. 40% lower than that with the argon plasma treatment. This improvement in $R_{\mathrm{ SD}} {W}$ resulted in higher mobility ( $\mu $ ) in the nitrogen-plasma-treated SA IGZTO TFTs. A nitrogen-plasma-treated SA IGZTO TFT with $L=10\,\,\mu \text{m}$ exhibited a high $\mu $ of 27.2 cm2/Vs.
Keywords